# 3D analyser stabilise the jitter

**URL:** <https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835>\
**Category:** Flame Questions\
**Created:** [September 24, 2020, 2:26pm UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835 "2020-09-24T14:26:32Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![johnt](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/johnt/32/14040_2.png) [@johnt](https://forum.logik.tv/u/johnt)\
**Post date:** [September 24, 2020, 2:26pm UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835/1 "2020-09-24T14:26:32Z")

</div>

Hi all - I’m trying to take some jitter out of a dolly move - I’ve tracked it in flame, got a good result, hooked up a projector but I can’t find pitch and yaw anymore to take out camera wobble - how does one take out the jitter these days?

---

<div class="post-metadata">

**Author:** ![randy](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/randy/32/6122_2.png) [@randy](https://forum.logik.tv/u/randy)\
**Post date:** [September 24, 2020, 2:29pm UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835/2 "2020-09-24T14:29:03Z")

</div>

I like @ChrZap’s trick of using Motion Vectors with multiple reference frames.

[![](https://us1.discourse-cdn.com/flex020/uploads/thedepartmentofexternalservices/original/1X/7bd1953e49d1b97db2deee136cc83ffcf37f46d2.jpeg "Logik Live Episode #26: Beauty Techniques with Christoph Zapletal") ](https://www.youtube.com/watch?v=TBjC0YL01Dw)

---

<div class="post-metadata">

**Author:** ![randy](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/randy/32/6122_2.png) [@randy](https://forum.logik.tv/u/randy)\
**Post date:** [September 24, 2020, 2:32pm UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835/3 "2020-09-24T14:32:31Z")

</div>

Or, for fastest results, Auto Stabilize with an increased Scene Flexibility and then switch the channels you want to smooth from Fixed to Smooth and animate Smoothing. How many times can I use the word smooth in the same sentence? Smooth.

---

<div class="post-metadata">

**Author:** ![greg](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/greg/32/1185_2.png) [@greg](https://forum.logik.tv/u/greg)\
**Post date:** [September 24, 2020, 4:05pm UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835/4 "2020-09-24T16:05:46Z")

</div>

I think pitch and yaw would just be the rotation channels. I’m assuming you’re using a copy of your tracked camera to render your projected plate - averaging the rotation channels should smooth out the bumps.

---

<div class="post-metadata">

**Author:** ![andymilkis](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/andymilkis/32/11067_2.png) [@andymilkis](https://forum.logik.tv/u/andymilkis)\
**Post date:** [September 25, 2020, 3:15am UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835/5 "2020-09-25T03:15:53Z")

</div>

Very smooth, Randy. As always! ❤🔥

---

<div class="post-metadata">

**Author:** ![johnt](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/johnt/32/14040_2.png) [@johnt](https://forum.logik.tv/u/johnt)\
**Post date:** [September 25, 2020, 5:12am UTC](https://forum.logik.tv/t/3d-analyser-stabilise-the-jitter/835/6 "2020-09-25T05:12:58Z")

</div>

So here’s the thing: I tracked it in flame and all I get are interest or xyz camera. In the interest there’s all that rotation on the interest but it’s incredibly minute and there’s roll. If I tried and averaged by even 6frames it goes crazy. I’m going to have a look again out of curiosity because it just doesn’t feel right. In the end, by coincidence, I did use and auto stab to get it over the line.
