# Batch disappeared

**URL:** <https://forum.logik.tv/t/batch-disappeared/5345>\
**Category:** Flame Questions\
**Created:** [March 17, 2022, 12:58pm UTC](https://forum.logik.tv/t/batch-disappeared/5345 "2022-03-17T12:58:37Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![paul\_round](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/paul_round/32/389_2.png) [@paul\_round](https://forum.logik.tv/u/paul_round)\
**Post date:** [March 17, 2022, 12:58pm UTC](https://forum.logik.tv/t/batch-disappeared/5345/1 "2022-03-17T12:58:37Z")

</div>

Anybody else seen this?  
I have a large batch set-up with many compasses, (one for each shot).  
I have just added another and now my batch is showing as empty.  
On the desk I can still see all the relevant clips and my context views are still working, but batch itself is showing as blank.

---

<div class="post-metadata">

**Author:** ![La\_Flame](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/la_flame/32/200_2.png) [@La\_Flame](https://forum.logik.tv/u/La_Flame)\
**Post date:** [March 17, 2022, 3:35pm UTC](https://forum.logik.tv/t/batch-disappeared/5345/2 "2022-03-17T15:35:51Z")

</div>

Have you turned on the navigator to check the Batch Schematic. Use CONTROL+ALT+N. This will give you a scrollable view of the schematic.

Grant

---

<div class="post-metadata">

**Author:** ![paul\_round](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/paul_round/32/389_2.png) [@paul\_round](https://forum.logik.tv/u/paul_round)\
**Post date:** [March 17, 2022, 3:48pm UTC](https://forum.logik.tv/t/batch-disappeared/5345/3 "2022-03-17T15:48:21Z")

</div>

Yes, I usually have that on anyway, nothing there, but my contexts are showing, plus all the clips are there in the reels.  
Oddly, I managed to get it back by loading the setup rather than the batch, maybe I’ve hit some kind of memory limit.

---

<div class="post-metadata">

**Author:** ![paul\_round](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/paul_round/32/389_2.png) [@paul\_round](https://forum.logik.tv/u/paul_round)\
**Post date:** [September 15, 2022, 8:46am UTC](https://forum.logik.tv/t/batch-disappeared/5345/4 "2022-09-15T08:46:07Z")

</div>

I had this again yesterday, however, loading the setup didn’t work, neither did loading into a new project ,however what did work this time was toggling between the render list and the schematic.  
I’d love to get to the bottom of this and find out whats causing it.  
Currently my batch set up is just over 800k.  
memory problem?

---

<div class="post-metadata">

**Author:** ![johnag](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/johnag/32/573_2.png) [@johnag](https://forum.logik.tv/u/johnag)\
**Post date:** [September 15, 2022, 10:02pm UTC](https://forum.logik.tv/t/batch-disappeared/5345/5 "2022-09-15T22:02:27Z")

</div>

I’ve seen this also and I think I eventually got back to the schematic by changing to different view modes. ie 1up 2up 3up etc

---

<div class="post-metadata">

**Author:** ![paul\_round](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/paul_round/32/389_2.png) [@paul\_round](https://forum.logik.tv/u/paul_round)\
**Post date:** [September 16, 2022, 10:46am UTC](https://forum.logik.tv/t/batch-disappeared/5345/6 "2022-09-16T10:46:10Z")

</div>

Yeah. I’d still like to know what causes it though.