# Batch Node Bin filtering **URL:** \ **Category:** Flame Questions\ **Created:** [September 17, 2021, 5:14am UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829 "2021-09-17T05:14:42Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![space\_monkey](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/space_monkey/32/49_2.png) [@space\_monkey](https://forum.logik.tv/u/space_monkey)\ **Post date:** [September 17, 2021, 5:14am UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/1 "2021-09-17T05:14:42Z")
I know I had this issue before but I can’t seem to remember how to fix it, issue is if I press a key over the tools in batch they don’t highlight but pop and then go back to like I didn’t press any hotkey over them, usually the a tools would stay selected, another issue is if I alt tab to a shell it automatically pops back to flame. I have the dlus smoke English layout selected in keyboard and I can’t figure it out , thanks ---
**Author:** ![Robg](https://avatars.discourse-cdn.com/v4/letter/r/a698b9/32.png) [@Robg](https://forum.logik.tv/u/Robg)\ **Post date:** [September 17, 2021, 6:30am UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/2 "2021-09-17T06:30:22Z")
It’s a bug I believe. If you hide the library when in batch it should behave when selecting nodes as expected. I think it’s been fixed in 2022 but I haven’t gone to that version yet. ---
**Author:** ![space\_monkey](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/space_monkey/32/49_2.png) [@space\_monkey](https://forum.logik.tv/u/space_monkey)\ **Post date:** [September 17, 2021, 4:37pm UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/3 "2021-09-17T16:37:24Z")
yes that was totally it, I completely forgot about that bug since it hasn’t happened in a while. Thank you!! ---
**Author:** ![randy](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/randy/32/6122_2.png) [@randy](https://forum.logik.tv/u/randy)\ **Post date:** [September 17, 2021, 4:42pm UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/4 "2021-09-17T16:42:09Z")
@KuleshovEffect ---
**Author:** ![space\_monkey](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/space_monkey/32/49_2.png) [@space\_monkey](https://forum.logik.tv/u/space_monkey)\ **Post date:** [September 17, 2021, 5:45pm UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/5 "2021-09-17T17:45:16Z")
Just putting this down since I just remembered it, if you switch your library from list to proxy view that also resets the bug. ---
**Author:** ![ManChicken](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/manchicken/32/233_2.png) [@ManChicken](https://forum.logik.tv/u/ManChicken)\ **Post date:** [September 17, 2021, 6:55pm UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/6 "2021-09-17T18:55:09Z")
Or you can stay in List View, but turn off thumbnails. ---
**Author:** ![PlaceYourBetts](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/placeyourbetts/32/6852_2.png) [@PlaceYourBetts](https://forum.logik.tv/u/PlaceYourBetts)\ **Post date:** [January 16, 2023, 12:23am UTC](https://forum.logik.tv/t/batch-node-bin-filtering/3829/7 "2023-01-16T00:23:51Z")
This bug has just come up again on one of our Flames running 2023.3. Have reported it to Autodesk and for now those workarounds are good 👍 Thanks Logik friends 🤗