# Flame host computer **URL:** https://forum.logik.tv/t/flame-host-computer/14956 **Category:** Flame Questions **Tags:** hosts **Created:** [September 23, 2026, 3:50pm UTC](https://forum.logik.tv/t/flame-host-computer/14956 "2026-09-23T15:50:14Z") **Posts on this page:** 1 **Showing post:** 5
### Author: ![allklier](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/allklier/32/4309_2.png) [@allklier](https://forum.logik.tv/u/allklier) #### Post date: [September 23, 2026, 4:14pm UTC](https://forum.logik.tv/t/flame-host-computer/14956/5 "2026-09-23T16:14:22Z")
That’s the thread I was thinking about… > [@Flame 2026 and cleaning up old storage](https://forum.logik.tv/t/flame-2026-and-cleaning-up-old-storage/14310/6): > > Thanks @Slabrie. Finally found it. But was still different. There were no old or stale files on my Linux machine. I checked every .cfg, cache, project folder. However, on my Mac, there was an older version of 2025.2.2 still installed. And it had three framestore partitions configured, two of which still existed, and one which was on a disk that is no longer with us. After removing the three framestore partitions from the sw config on the Mac, uninstalling the old 2025.2.2 version of Flame an… There is probably a variable to turn this discovery off. The file in question is likely in /opt/Autodesk/cfg. As of 2026 there is no longer any S+W config in the setup tool. But I just saw a terminal message fly by the other day that it was trying access a frame store on another system, even though all of mine are now 2026 and 2027. Keep in mind that if Flame is installed, even if the app is not open, the S+W server processes are still in the background. --- _[View the full topic](https://forum.logik.tv/t/flame-host-computer/14956)._