# Looking for help with burn

**URL:** <https://forum.logik.tv/t/looking-for-help-with-burn/6249>\
**Category:** Flame Questions\
**Created:** [July 12, 2022, 12:45am UTC](https://forum.logik.tv/t/looking-for-help-with-burn/6249 "2022-07-12T00:45:19Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![andymilkis](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/andymilkis/32/11067_2.png) [@andymilkis](https://forum.logik.tv/u/andymilkis)\
**Post date:** [July 12, 2022, 12:45am UTC](https://forum.logik.tv/t/looking-for-help-with-burn/6249/1 "2022-07-12T00:45:19Z")

</div>

Hi friends,

I’m trying to set up a burn node. I have a 2nd machine. Burn is installed on it. I can see it on my network. I can see it in Backburner monitor. I can submit jobs to it from Flame on my main machine, but the jobs don’t start.

Any ideas?

Thx!

---

<div class="post-metadata">

**Author:** ![randy](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/randy/32/6122_2.png) [@randy](https://forum.logik.tv/u/randy)\
**Post date:** [July 12, 2022, 12:49am UTC](https://forum.logik.tv/t/looking-for-help-with-burn/6249/2 "2022-07-12T00:49:30Z")

</div>

Couple of things to double check…

On your Flame you ran backburnerConfig, oui? And answered…  
Y  
Y  
\< Flames IP address \>  
\< Flames IP address \>

And on your Burn 1 you ran backburnerConfig, oui? And answered…  
Y  
Y  
\< Flames IP address \>  
\< your Burn 1 IP address \>

And if you installed Burn whilst a monitor was attached, make sure that:

opt/Autodesk/cfg/env.cfg

…is set to 0, not 1.

---

<div class="post-metadata">

**Author:** ![Sinan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/sinan/32/155_2.png) [@Sinan](https://forum.logik.tv/u/Sinan)\
**Post date:** [July 12, 2022, 4:33pm UTC](https://forum.logik.tv/t/looking-for-help-with-burn/6249/3 "2022-07-12T16:33:13Z")

</div>

Well @andymilkis, you’ve been burned. I’m sorry. It was just begging to be said.

---

<div class="post-metadata">

**Author:** ![andymilkis](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.logik.tv/andymilkis/32/11067_2.png) [@andymilkis](https://forum.logik.tv/u/andymilkis)\
**Post date:** [July 13, 2022, 12:53am UTC](https://forum.logik.tv/t/looking-for-help-with-burn/6249/4 "2022-07-13T00:53:12Z")

</div>

Problem solved! I had a Mount point misspelled on the burn node. Burning away pleasantly now! 👏🏻🔥👏🏻🔥👍🏻🔥