# Micro freezes
**URL:** https://forum.logik.tv/t/micro-freezes/4265
**Category:** Flame Questions
**Created:** [November 3, 2021, 2:17pm UTC](https://forum.logik.tv/t/micro-freezes/4265 "2021-11-03T14:17:26Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 2:17pm UTC](https://forum.logik.tv/t/micro-freezes/4265/1 "2021-11-03T14:17:26Z")
Now that I’ve switched to using 2022, I’m experiencing the micro freezes that have been mentioned before.
Any news on a solution?
---
### Author:  [@andymilkis](https://forum.logik.tv/u/andymilkis)
#### Post date: [November 3, 2021, 2:35pm UTC](https://forum.logik.tv/t/micro-freezes/4265/2 "2021-11-03T14:35:16Z")
That sucks. Are you on Linux? Are you networked with more than one machine? We installed 2022.2 2 weeks ago and I was very concerned about this. We did a slow rollout to see if it happened. Fortunately, we haven’t experienced any of the micro freezes so far.
---
### Author:  [@ytf](https://forum.logik.tv/u/ytf)
#### Post date: [November 3, 2021, 2:35pm UTC](https://forum.logik.tv/t/micro-freezes/4265/3 "2021-11-03T14:35:50Z")
I have heard that it is better in 2022.2 I am on .1 so I can’t say for sure.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 2:45pm UTC](https://forum.logik.tv/t/micro-freezes/4265/4 "2021-11-03T14:45:00Z")
Linux Andy, standalone machine, but on a network. Tim, this is 2022.2.
---
### Author:  [@Lightningad](https://forum.logik.tv/u/Lightningad)
#### Post date: [November 3, 2021, 2:48pm UTC](https://forum.logik.tv/t/micro-freezes/4265/5 "2021-11-03T14:48:28Z")
I was having micro freezes (and not so micro) along with some weird error messages in Terminal. A search brough up this…
[vram problem](https://knowledge.autodesk.com/support/flame-products/troubleshooting/caas/sfdcarticles/sfdcarticles/VM-load-pref-failed-loading-var-tmp-tmp-with-error-6-and-crashing-when-loading-Batch-in-Flame.html)
I tried adjusting the vram settings as suggested and the flame does feel less freezy. It might not be the same freezes you are having though.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 2:54pm UTC](https://forum.logik.tv/t/micro-freezes/4265/6 "2021-11-03T14:54:36Z")
I have a load of error messages in my shell:
Param GRADIENT\_RADIUS of type int was not found at shaderIndex = 2 and y = 0
also:
VM load pref failed loading /opt/Autodesk/user/222/batch/pref/MV.pref with error 6
---
### Author:  [@Lightningad](https://forum.logik.tv/u/Lightningad)
#### Post date: [November 3, 2021, 3:03pm UTC](https://forum.logik.tv/t/micro-freezes/4265/7 "2021-11-03T15:03:08Z")
its that last one - VM Load - that i searched for and found that link.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 3:51pm UTC](https://forum.logik.tv/t/micro-freezes/4265/8 "2021-11-03T15:51:53Z")
Hasn’t worked for me.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 5:41pm UTC](https://forum.logik.tv/t/micro-freezes/4265/9 "2021-11-03T17:41:47Z")
However, I have noticed If I pop up a shell and quickly go back, it stops hanging.
---
### Author:  [@AndyBrown](https://forum.logik.tv/u/AndyBrown)
#### Post date: [November 3, 2021, 6:26pm UTC](https://forum.logik.tv/t/micro-freezes/4265/11 "2021-11-03T18:26:43Z")
I find that swearing at Flame makes the time pass faster, Paul.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 6:27pm UTC](https://forum.logik.tv/t/micro-freezes/4265/12 "2021-11-03T18:27:52Z")
🤣 🤣
---
### Author:  [@Ton](https://forum.logik.tv/u/Ton)
#### Post date: [November 3, 2021, 8:05pm UTC](https://forum.logik.tv/t/micro-freezes/4265/13 "2021-11-03T20:05:08Z")
Got the logik matchbox python script installed? Remove it… also… sometimes, while in a freeze, press ALT to unfreeze. I’ve got much less micro freezes with 2022.2… but some are still there…
🙂
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 3, 2021, 8:39pm UTC](https://forum.logik.tv/t/micro-freezes/4265/14 "2021-11-03T20:39:29Z")
I’ll check that out tomorrow.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 4, 2021, 11:03am UTC](https://forum.logik.tv/t/micro-freezes/4265/15 "2021-11-04T11:03:11Z")
No matchbox python script installed and pressing ALT isn’t working for me.
Correction, ALT does seem to be working.
---
### Author:  [@Ben](https://forum.logik.tv/u/Ben)
#### Post date: [November 4, 2021, 12:15pm UTC](https://forum.logik.tv/t/micro-freezes/4265/16 "2021-11-04T12:15:49Z")
I get constant VM errors and it freezes. Ive tried the solutions but nothing works.
This isnt when just opening a batch its happening as i work, during playback, basically all the time.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 4, 2021, 1:07pm UTC](https://forum.logik.tv/t/micro-freezes/4265/17 "2021-11-04T13:07:53Z")
Same here, it doesn’t matter what I’m doing, I work mainly in batch and it is constantly happening.
I’m beginning to wish I hadn’t upgraded.
---
### Author:  [@MikeV](https://forum.logik.tv/u/MikeV)
#### Post date: [November 4, 2021, 5:23pm UTC](https://forum.logik.tv/t/micro-freezes/4265/18 "2021-11-04T17:23:19Z")
Is there are a problem with that script causing freezing?
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 4, 2021, 5:38pm UTC](https://forum.logik.tv/t/micro-freezes/4265/19 "2021-11-04T17:38:04Z")
No, it’s happening on several setups.
Wish I’d stayed with 2021 now.
---
### Author:  [@paul\_round](https://forum.logik.tv/u/paul_round)
#### Post date: [November 6, 2021, 3:01pm UTC](https://forum.logik.tv/t/micro-freezes/4265/20 "2021-11-06T15:01:41Z")
But, it’s not happening on my hackintosh, just the linux box at work.
---
### Author:  [@andymilkis](https://forum.logik.tv/u/andymilkis)
#### Post date: [November 6, 2021, 4:48pm UTC](https://forum.logik.tv/t/micro-freezes/4265/21 "2021-11-06T16:48:08Z")
Have you reached out to support?
[Next page](https://forum.logik.tv/t/micro-freezes/4265.md?page=2)