# Rocky Linux installation Problem

**URL:** https://forum.logik.tv/t/rocky-linux-installation-problem/13184
**Category:** Hardware Questions
**Tags:** rocky
**Created:** [July 12, 2025, 5:16pm UTC](https://forum.logik.tv/t/rocky-linux-installation-problem/13184 "2025-07-12T17:16:47Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Lethcius](https://avatars.discourse-cdn.com/v4/letter/l/3da27b/32.png) [@Lethcius](https://forum.logik.tv/u/Lethcius)
#### Post date: [July 12, 2025, 5:16pm UTC](https://forum.logik.tv/t/rocky-linux-installation-problem/13184/1 "2025-07-12T17:16:47Z")

</div>

Hello,  
I’m trying to install Rocky Linux on my computer for my home setup, but during the initial boot phase, after selecting “Install Rocky Linux (manual partitioning)”, it stays at the point I marked in red for about 30 minutes. Then I get the error shown below, and the screen goes black with only a blinking underscore in the top-left corner.

I first tried version 9.5, then 9.3. My device has two NVMe SSDs, and I removed one of them and tried again. In the BIOS, Secure Boot is disabled and the boot mode is set to UEFI. However, I can’t get past this screen.

If you have any knowledge about this issue, I would appreciate your help.

> **[Screenshot](https://prnt.sc/QyMWbseiNHq0)**
>
> Captured with Lightshot

* * *

If someone else experiences the same problem, disabling the onboard GPU in the BIOS fixed the issue.